Network Tab - Welch Allyn Connex Spot Monitor Service Manual

26 Advanced settings
•
Specify advanced averaging interval settings
Averaging intervals are available in the Office profile.
1. In Advanced settings, touch the Parameters > Averaging tabs.
2. Specify settings.
Setting
NIBP averaging program
Readings to average
Delay to start (minutes)
Time between (minutes)
Keep if + or – (mmHg)
Summary display box
3. Do one of the following:
•
•
Specify advanced program interval settings
1. In Advanced settings, touch the Parameters > Program tabs.
2. Specify settings.
Setting
Program
Intervals
3. Do one of the following:
•
•

Network tab

Specify radio settings
This task is applicable only to monitors that have a wireless radio installed. Devices can
be configured with a wireless or a Bluetooth radio.
To exit Advanced settings and return to the Home tab, touch Exit.
To continue in Advanced settings, touch another tab.
To exit Advanced settings and return to the Home tab, touch Exit.
To continue in Advanced settings, touch another tab.
To exit Advanced settings and return to the Home tab, touch Exit.
Action/Description
Select the averaging program to view or modify. You can
change the name of the averaging program.
Select which readings in a series to use for averaging
(and the number of readings to average as a result).
Enter the number of minutes to wait before the
averaging program starts (after touching "Start
intervals") and the start of the first reading.
Enter the number of minutes to wait between readings.
Enter the range that the program uses as criteria to
accept or reject readings and establish the baseline
reading. For more information about how this setting
affects the program, refer to the section "Excluded
readings" below.
Displays currently selected settings.
Action/Description
Select the program to view or modify. You can change
the name of the program.
Specify up to five sets of interval readings for this
program. For each set, specify the number of minutes
between interval readings and the number of times that
each interval should run (repetitions) before proceeding
to the next set.
®
Connex Spot Monitor