Task Functions - LX Navigation Zeus User Manual

LX Zeus v4.0.2
3.5.4

Task Functions

Automatic and manual starts are possible by using
functions ARM and NEXT TP. All functions are available by
pressing the Zoom rotary knob when on the TSK
navigation page or by pressing the TSK/MOVE button on
other pages.
3.5.4.1 Task Start
To start a task automatically use the ARM command
which is displayed after a press of the TSK button. Arm
means that the task will be started automatically after
crossing the start line.
The start line can be crossed multiple times, the time of
the last valid start will be used for calculation of statistics.
Every valid start is indicated by a green message on the
screen.
Under Settings>User Interface>Track/destination settings
can be selected whether navigation is aimed at the zone's
center or the zone`s closest point.
During flight the task can be disarmed. Activation of ARM
and DISARM are clearly shown on the display in a message
and by an ARMED icon.
If pressing ARM before crossing the start line is forgetten,
and the glider is already on the task, then the second option
is to press Next TP. Next TP command will change over to
next TP every time when activated, regardless of whether
the glider is in the sector or not. It will also take the latest
start line crossing time, to ensure that task statistics will be
correct.
3.5.4.2 Task Restart
After a task has been started a restart can be done at any
time. Use the Restart button in the TSK menu. The Restart
button will become active once the task has started. After
restarting all task statistics data will be deleted and ARM
status will become active again making it possible to do
another automatic start.
69 | P a g e