Faq (Frequently Asked Questions) - LX Navigation Zeus User Manual

15 FAQ (frequently asked questions)

1. Can I connect Swiss Flarm and how will it work?
Flarm can be connected to LX Zeus NMEA (flarm) port. Zeus will see flarm objects and will send
declaration to flarm (task and pilot's settings)
2. Volkslogger, Colibri and other loggers - how to connect and what is the advantage?
Loggers can be connected to NMEA (flarm) port. Zeus will take GPS signal from them and give
them 12 V power.
3. What do I get if I buy LX ZEUS FLARM IGC
LX Zeus Computer, Flarm IGC logger, Flarm dipole antenna, SD card for Flarm, Flarm cable to
Zeus, Flarm SD cable to Zeus, Flarm GPS antenna, LX Eos IGC, main power cable with switch, SD
card reader, SD card (micro), SD to micro adapter, input interface, speaker, GPS antenna, OAT
sensor with cable, CAN cable, IGC cable for Oudie, baro trace, USB key
For more information, please check with your local dealer.
4. Zeus shows Voltage .0.0 V?
Voltage is measured on the Vario unit, so this means that there is a problem with connection ZEUS
– Vario. Check connection – cable and both units.
5. Voltage – what is the operating Voltage?
LX Zeus operates approximately from 8 V to 16 V.
6. ADSB and Powerflarm on Zeus – how to connect, what kind of warnings, warnings with Voice
modules?
ADSB can be connected direct to LX ZEUS using the FLARM port. Zeus will provide all Flarm
warnings – same as Flarm Red Box or Mini Box.
7. OUDIE – is it possible to connect, what cable, where to connect?
Oudie can be connected either via a special Power and data cable, which is provided with each
Zeus, or by connecting it via Bluetooth to LX Eos/Era varios.
8. AIRSPACE Warnings and a Voice module?
The voice module will also give voice-warnings for airspaces.
9. ENL and Zeus?
If an IGC Zeus is ordered, then the ENL sensor is the part of the system without charge (built in
Colibri II, LX Eos)
10. AHRS – is it adjustable so that it can be set on the ground?
Yes, of course. For explanation of the procedure, check the relevant chapter in this manual.
11. CONDOR simulator – can you connect Zeus and play with it?
Not possible by default (must be specified when ordering). There will be only GPS data, no baro
data.
12. Can I use OAT sensor from LX 7007, LX 7007 C and LX 5000?
It is not possible.
13. Can I use remote from LX 5000, LX 7007 / C?
LX Zeus v4.0.2
114 | P a g e