Table of Contents
Advertisement
Dial-in Users Screen
This screen is reached via the Dial-in Users button on the Dial-in screen.
•
All defined users are listed. If you have not defined any users, only the "guest" user will
be listed.
•
When a user is selected, their data is displayed in the "User Properties" area, where it can
be modified if desired.
Data - Dial-in Users Screen
User List
User List
User Properties
User Name
Password
Verify
Enable dial-in
access
Figure 36: Dial-in Users Screen
•
This lists all users who currently exist.
•
The "guest" user is pre-defined, and will always be in the list.
•
Select the user you wish to change. Data for the selected user will be
shown in the "User Properties" fields.
•
Enter the name for the new user here. Spaces, punctuation, and
special characters must NOT be used in the name.
•
User names are case insensitive (case is ignored), so you can not
have 2 names which differ only by case.
•
When a remote user establishes a Dial-in connection, they will be
prompted for the this User name and the password (below).
The password for this user. The user must provide this password when
they establish a Dial-in connection.
Re-enter the password for this user, to ensure it is correct.
If checked, Dial-in access is available for this user.
If not checked, a Dial-in connection will not be allowed.
Dial-in
65
Advertisement
Table of Contents
