Parameter
Enable
MAC
Mapping
LAN
Host IP Address
LAN Host Start Port/LAN Host End
Port
3. Click Add.
Postrequisite
You can also modify or delete the port forwarding configuration, as listed in
Table 43 Port Forwarding Operations
Button
6.7 DNS Service
DNS service configuration includes the following:
Domain Name
�
Hosts
�
DNS
�
6.7.1 Domain Name
Context
To set the domain name, perform the following steps:
Steps
1. Choose [Application→ DNS Service→ Domain Name], as shown in
Description
Select the check box to enable the MAC mapping function.
IP address of the LAN-side host
Port number range of the LAN-side host
Description
To modify the port forwarding configuration
To delete the port forwarding configuration
95
Table
43.
Figure
69.