Configuring Ipv6 Dhcp Server - Zte ZXHN H108N Maintenance Management Manual

Parameter
Default Gateway
Lease Time
2. Specify the DHCP server parameters, and then click Submit.
The DHCP server is configured.
IP addresses are automatically assigned to the user-side PCs and wireless devices that are connected
to the ZXHN H108N.

6.3.2 Configuring IPv6 DHCP Server

This procedure describes how to configure the IPv6
addresses to the user-side computers or wireless devices that are connected to the ZXHN H108N
device.
Steps
1. On the navigation tree, click [Network→ LAN→ DHCP Server(IPv6)]. The IPv6 DHCP server
configuration page is displayed, see
Figure 20 IPv6 DHCP Server
Table 16 lists the IPv6 DHCP server parameters.
Description
It is usually the IP address of the ZXHN H108N device by default.
The time during which the client PCs use the IP addresses
assigned by the DHCP server
After the lease time expires, the private IP address will be
available for assigning to other network devices.
Default: 86400 seconds
DHCP
Figure 20.
38
server to dynamically allocate IPv6