ZXHN H268A Maintenance Management Manual(EXETEL)
Figure 4-13 IGMP Mode
2. Click on to enable the function or click off to disable the function.
l
Click All On to select all IGMP functions.
l
Click All Off to cancel all IGMP functions.
3. Click Apply button to apply the changes.
– End of Steps –
4.6.2 Configure the MLD
The section describes how to configure MLD. MLD provides the parameters of MLD
configuration features.
Steps
MLD Mode
1. On the main page of the ZXHN H268A, select Internet > Multicast > MLD to open
the MLD Mode page, as shown in
Figure 4-14 MLD Mode
2. Enable or disable MLD function.
SJ-20150916162339-007|2017-02-16 (R1.0)
Note:
Figure
4-14.
4-20
ZTE Proprietary and Confidential