Configuring Dynamic Routing; Figure 5-39 Dynamic Routing - Zte ZXHN H168N Maintenance Management Manual

l
Click All On to select all Port Binding types.
l
Click All Off to cancel all Port Binding types.
3. Click Apply button to apply the changes.
– End of Steps –

5.8 Configuring Dynamic Routing

The section describes how to configurate Dynamic Routing. Dynamic Routing provides
the parameters of
Steps
1. On the main page of the ZXHN H168N, select Internet > Dynamic Routing to go to
the Dynamic Routing page.
The page as shown in

Figure 5-39 Dynamic Routing

The RIP
RIP
2. Configure the
SJ-20140220172310-002|2014-03-03 (R1.0)
Note:
RIP configuration features.
Figure
Note:
configuration options vary with the
RIP parameters.
5-39.
RIP Version value.
5-39
Chapter 5 Internet
ZTE Proprietary and Confidential