Emerson IEC 62591 Instruction Manual page 65

IEC 62591 Wireless Interface Instruction Manual (for ROC800-Series and FloBoss 107)
Revised June-2018
15. The update process preserves the network settings for your module,
but you should still verify that the settings are correct. Click Cancel
to close the Update Firmware screen, click on the IEC 62591
module, and select the Network tab to review the network settings.
Figure 3-36. Verifying if settings are still correct
16. The update is complete. Remove the USB drive from the port on the
IEC 62591 module.
Configuration and Commissioning 3-47