Commissioning Devices - Emerson IEC 62591 Instruction Manual

IEC 62591 Wireless Interface Instruction Manual (for ROC800-Series and FloBoss 107)

3.3.2 Commissioning Devices

3-26
▪ On-Line. When the Status field shows On-line, you can begin
commissioning devices for the network.
Proceed to Commissioning Devices.
When you select the Commission tab, ROCLINK 800 displays the
Commission screen (see Figure 3-16). You use this screen to
individually or collectively commission devices.
Figure 3-14. Commission tab
This screen has two lists, Uncommissioned and Commissioned. When
the Status field on the Network screen displays On-line, ROCLINK 800
automatically begins adding devices to the Uncommissioned list. To
commission a device, you move it to the Commissioned list in either of
two ways:
▪ Select the device and click Commission. ROCLINK 800 places the
device in the first available empty position.
:
Notes
▪ To select several devices, press Ctrl and left-click each
additional device. Click Commission when you have finished
selecting devices.
▪ When commissioning a HART device connected to an Emerson
Wireless 775 THUM
HART device and the THUM Adapter and places them both in
the Uncommissioned list. Commission the device as normal.
Commission the THUM Adapter only if you need the Adapter's
process data.
Configuration and Commissioning
™
Adapter, the system detects both the
Revised June-2018