Wiring The Iec 62591 Module To The Field Link - Emerson IEC 62591 Instruction Manual

Wireless interface. for roc800-series and floboss 107

Hide thumbs Also See for IEC 62591:

Table of Contents

IEC 62591 Wireless Interface Instruction Manual (ROC800-Series and FloBoss 107)

2.3.2 Wiring the IEC 62591 Module to the Field Link

2-6

Connect the positive power lead to the "+" power terminal and the

negative power lead to the "–" power terminal.

Connect the data + lead to the "A (+)" terminal and the data – lead

to the "B (–)" terminal (see Figure 2-4).

Plug and seal any unused conduit connectors.

Replace the housing cover.

A. Data A (+)

B. Data B (–)

C. Return

D. +10.5 to 30 Vdc

Figure 2-4. Field Link Power and Data Wiring

Since the ROC800 and FB107 modules use the same PCB, you wire the

modules to the Field Link in the same way. Figure 2-5 shows wiring for

the FB107 IEC 62591 module; Figure 2-6 shows wiring for the

ROC800 IEC 62591 module.

: The wire loop between connectors 1 and 3 and between

Note

connectors 2 and 4 provides termination for the RS-485

connections between the Field Link and the module.

Installation

Revised June-2018

Table of Contents