Positioning The Antenna; Mounting The Field Link - Emerson IEC 62591 Instruction Manual

Wireless interface. for roc800-series and floboss 107

Hide thumbs Also See for IEC 62591:

Table of Contents

IEC 62591 Wireless Interface Instruction Manual (ROC800-Series and FloBoss 107)

2.2.2 Positioning the Antenna

2-4

Position the antenna vertically, either straight up or straight down,

approximately 1 m (3 ft) from any large structure, building, or

conductive surfaces to allow clear communication with other devices.

See Figure 2-2.

You typically mount the Field Link on a pipe or mast using the clamps

provided in the kit (see Figure 2-3).

Attach the L-shaped bracket to the pipe or mast.

▪

For pipe installations, insert the larger U-bolt around the 2-in.

pipe, through the L-shaped bracket, and through the washer plate

(see the left side of Figure 2-3). Use a ½-in. socket-head wrench

to secure the nuts to the U-bolt.

▪

For mast installations, bolt the L-shaped bracket securely to the

mast (see the right side of Figure 2-3).

Insert the smaller U-bolt around the base of the Field Link and

through the L-shaped bracket.

Use a ½-in. socket-head wrench to fasten the nuts to the U-bolt.

Installation

Figure 2-2. Antenna Position

Revised June-2018

Table of Contents