IEC 62591 Wireless Interface Instruction Manual (for ROC800-Series and FloBoss 107)
1.1 Scope of Manual
1.2 Hardware
1.2.1
1-2
Figure 1-1. IEC 62591 Field Installation
This manual contains the following chapters:
Chapter 1
General Information
Chapter 2
Installation
Chapter 3
Configuring and
Commissioning
Chapter 4
Troubleshooting
Index
The IEC 62591 Wireless Interface has two basic components: the IEC
62591 Wireless Interface module ("module") and the Field Link.
IEC 62591 Wireless Interface Module
Functionally, there is no difference between the module for the FB107
and the module for the ROC800. They use the same printed circuit
board (PCB) but have a slightly different plastic casing. See Figure 1-2;
the ROC800 module is on the left and the FB107 module is on the right.
General Information
Provides an overview of the hardware for the IEC
62591 Wireless Interface.
Provides information on installing the IEC 62591
Wireless Interface modules, installing the Field Link,
and wiring the Field Link to the module.
Provides information using ROCLINK 800 to
configure and commission the Wireless Interface.
Provides information on diagnosing and correcting
problems for the IEC 62591 Wireless Interface.
Provides an alphabetic listing of items and topics
contained in this manual.
Revised June-2018