Updating Module Firmware - Emerson IEC 62591 Instruction Manual

Wireless interface. for roc800-series and floboss 107

Hide thumbs Also See for IEC 62591:

Table of Contents

IEC 62591 Wireless Interface Instruction Manual (for ROC800-Series and FloBoss 107)

3.4 Updating Module Firmware

Revised June-2018

The screen provides basic information to create and process the

diagnostic log. However, Technical Support personnel can use the

Logging Severity frame to more thoroughly identify problems with your

system.

Field

Logging Severity

Set Logging Level

You can also use the USB port on the IEC 62591 module to upgrade the

firmware on the module. To access this option, select Utilities > Update

Firmware on the ROCLINK 800 main menu bar. The Update Firmware

screen displays.

Figure 3-20. Update Firmware tab

Select the IEC62591 Module tab. The IEC 62591 Module screen

displays:

Configuration and Commissioning

Description

Sets the amount of accumulated system activity

data included on the diagnostic log. 1 is the least

comprehensive setting and 9 is the most

comprehensive setting. The default setting is 7.

Note:

Use this field only under the direction of

Technical Support personnel.

Click to set the severity of logs. The system

validates your selection by displaying the message

Set Logging Severity X COMPLETED, where X

represents the severity you have selected.

3-39

Table of Contents