Commissioning Devices - Emerson IEC 62591 Instruction Manual

IEC 62591 Wireless Interface Instruction Manual (for ROC800-Series and FloBoss 107)

3.2.1 Commissioning Devices

3-8
The following sections discuss how to use these tabs to manage your
network.
You use the Commission tab to individually or collectively commission
devices.
Figure 3-5. Commission tab
This screen has two lists, Uncommissioned and Commissioned. When
the Status field on the Network screen displays On-line, the Field Link
automatically begins adding devices to the Uncommissioned list. To
commission a device, you move it to the Commissioned list in either of
two ways:
▪ Select the device (see Figure 3.5) and click Commission.
ROCLINK 800 places the device in the first available empty row
on the Commissioned list.
:
Notes
▪ To select several devices, press Ctrl and left-click each
additional device. Click Commission when you have finished
selecting devices.
▪ When commissioning a HART device connected to a Emerson
Wireless 775 THUM
HART device and the THUM Adapter and places them both in
the Uncommissioned list. Commission the device as normal.
Commission the THUM Adapter only if you need the Adapter's
process data.
▪ Select the device and "drag" it to a position on the Commissioned
list.
Configuration and Commissioning
™
Adapter, the system detects both the
Revised June-2018