Iec 62591 Module Interface (Fb107) - Emerson IEC 62591 Instruction Manual

IEC 62591 Wireless Interface Instruction Manual (for ROC800-Series and FloBoss 107)

3.2 IEC 62591 Module Interface (FB107)

3-4
The FB107 automatically recognizes the IEC62691 module when you
install it and adds it to the graphical interface. When you click on the
module, ROCLINK 800 displays the main IEC 62591 screen below the
image of the FB107:
Figure 3-2. FB107 Graphic Interface with IEC 62591 Module
The module screen has three tabs:
Tab
General
Network
Transmitter
Configuration and Commissioning
Description
Provides read-only statistical information about the
IEC 62591 module.
Defines the Join Key and Network ID for the
network. These values must correspond to the
Network ID and Join Key in the devices.
Lists all transmitters defined in the network. Click
on a defined device to access the Transmitter
screen, which displays statistics and information for
that transmitter.
Revised June-2018