Emerson IEC 62591 Instruction Manual page 45

IEC 62591 Wireless Interface Instruction Manual (for ROC800-Series and FloBoss 107)
Revised June-2018
▪ Select the device and "drag" it to a position on the Commissioned
list.
The number of rows on the Commission screen correlates to the number
of wireless devices your controller supports. Each row represents a
specific logical position. If, during commissioning, you want the
controller to store information from a specific wireless device in a
specific logical position, you can commission that device to that logical
by selecting that device and "dragging" it to the appropriate position on
the Commissioned list.
: Once you commission a device to a particular logical, you
Note
cannot drag it another logical position. You must first
decommission the device and then recommission it to the new
logical position.
When you select a device in the Uncommissioned column, the
Commission button activates:
Figure 3-15. Active Commission button
: To select more than one device, press the Ctrl key and left-click
Note
each additional device.
Click Commission. After a few minutes, the device moves from the
Uncommissioned to the Commissioned list:
Configuration and Commissioning 3-27