Retrieving A Diagnostic Log - Emerson IEC 62591 Instruction Manual

IEC 62591 Wireless Interface Instruction Manual (for ROC800-Series and FloBoss 107)

3.2.4 Retrieving a Diagnostic Log

3-20
Field
Received
Other HART
Messages
Transmitted
Other HART
Messages Received
Radio Messages
Transmitted
Radio Messages
Received
Reset Statistics
The IEC 62591 module has a USB port which you can use to retrieve a
diagnostic log to assist in troubleshooting. Select the Diagnostics tab to
display the Diagnostics screen:
: It may take up to three minutes after initial installation or after
Note
updating module firmware before the IEC 62591 module
recognizes a drive plugged into the module's USB port.
Configuration and Commissioning
Description
messages the IEC62591 module has received from
the Field Link.
This read-only field shows the number of Field Link
specific messages the IEC62591 module has sent
to the Field Link. These messages are sent to
retrieve data from the Field Link.
This read-only field shows the number of Field Link
specific messages the IEC62591 module has
received from the Field Link.
This read-only field shows the number of
WirelessHART network messages the IEC62591
module has sent to the Field Link.
This read-only field shows the number of
WirelessHART network messages the IEC62591
module has received from the Field Link.
Click to reset all values on this tab.
Revised June-2018