Emerson IEC 62591 Instruction Manual page 61

IEC 62591 Wireless Interface Instruction Manual (for ROC800-Series and FloBoss 107)
Revised June-2018
Figure 3-26. Verifying Run Mode
6. Verify that the module is connected to the network and that the
module is currently on-line.
Figure 3-27. Verifying Online status
Remove the USB drive for your PC's USB port and attach it to the
USB port on the IEC 62591 module.
7. On the main ROCLINK screen select Utilities > Update Firmware.
Figure 3-28. Selecting Utilities > Update Firmware
Configuration and Commissioning 3-43