Safety Directions For Disinfection - AGFA DX-D 40C User Manual

38 | DX-D 40C, DX-D 40G | Introduction to the DR Detector

Safety directions for disinfection

0290A EN 20140626 1622
Warning: When the equipment is going to be cleaned, be
sure to turn OFF the power of each device, and to unplug the
power cord from the AC outlet. Never use anhydrous or high
solvency alcohols, benzine, thinner or any other flammable
cleaning agent. Otherwise, it may result in fire or electric
shock.
Warning: All appropriate policies and procedures should be
followed to avoid contamination of the staff, patients and
equipment.
Warning: Make sure that the equipment is properly
decontaminated and disinfected before shipment.
Warning: The selection and description of the appropriate
disinfection procedure and policy is the responsibility of the
user.
Warning: All applicable instructions of the applied
disinfecting product have to be followed (e.g. use, dilution,
shelf life, storage, material compatibility, interaction with
cleaning compounds, safe use, and disposal).
Warning: Before disinfecting the equipment, assure that the
equipment is clean.
Warning: Do not pour liquid directly on the equipment.
Always use a low-linting cloth dampened (not dripping)
with the solution.
Warning: Be sure that all surfaces are thoroughly dry before
returning the equipment to use. Disinfecting solution may
cause skin irritation to the patient.
Warning: Use in well-ventilated areas.