Safety Directions - AGFA DX-D 100 User Manual

42 | DX-D 100 | Introduction

Safety Directions

0187K EN 20191024 1609
WARNING:
Only qualified and authorized personnel shall operate this
system. In this context 'qualified' means those persons legally
permitted to operate this equipment in the jurisdiction in which
the equipment is being used, and 'authorized' means those
persons authorized by the authority controlling the use of the
equipment. Full use must be made of all radiation protection
features, devices, systems, procedures and accessories.
WARNING:
Improper changes, additions, maintenance or repair of the
equipment or the software can lead to personal injury, electrical
shock and damage to the equipment. Safety is only guaranteed
when changes, additions, maintenance or repairs are carried out
by an Agfa certified field service engineer. A non certified
engineer performing a modification or service intervention on a
medical device, acts on his own responsibility and makes the
warranty void.
WARNING:
System unavailability due to hardware or software failure. If the
product is used in critical clinical workflows, a backup system
has to be foreseen.
WARNING:
Do not connect the equipment with anything other than
specified. Doing so may result in fire or electric shock.
WARNING:
Do not connect additional extensions cords or multiple power
socket outlets to the system.
WARNING:
According to MDD/93/42/EEC, this unit is equipped with EMC
filters. The lack of proper grounding may produce electrical
shock.
WARNING:
To avoid risk of electric shock, do not remove any covers.
Changes, additions, maintenance or repairs must be carried out
by an Agfa certified field service engineer.