24 VDC Analytical Module assembly w/o GC Module
24 VDC Analytical Module assembly with GC Module
Cable between the Analog Processor and the Termination Board
Digital Controller Board and Display, Completed assembly.
Digital Controller Board Assembly (Auxiliary unit with no display)
Filter Frit for Feed-through Assembly
GC Module tested and characterized
MMI Port RS-232
Ribbon Cable for connection between the Digital Controller and
Termination Panel
Termination Panel
USB Local MMI Port
5.3 Field Tool Kit
The recommended NGC maintenance tools are presented in
included in the optional field tool kit.
Qty
-001
1
1
1
1
1
1
1
1
1
1
1
1
5.4 Visual Inspection
The NGC should be given an external visual examination on an established time
period. Visual checks maintain optimum system operation and accuracy of natural
gas sample analysis.
5.4.1
Inspection
During the visual inspection, components should be examined for the following
conditions:
Page 5–6
Part Description
Table 5–3 Tool Requirements
-002
Part Number
2102304-001
1800683-001
1801690-001
T10790
T10440
T10601
1801821-001
1801822-001
1801820-001
T10805
T10800
1801819-001
Stock Application
1
1
1
1
1
2
1
1
1
1
Table 5–3
Description
Bag, ABB Nylon 11" x 6" Tool
Cutter, 1/16" Tubing
Extractor Tool, IC 8-24 Pin
Hex Key, Set 1/16-5/16 (12 Pcs)
Screwdriver, 3/32 x 2" Standard
Stripper, Wire
Tool, Ball Driver, 10.3" Long, 5/16"
Tools, Nut Driver, 6" Shank, ¼"
Wrench, 10" Adjustable
Wrench, 3/8 x 7/16 Open End
Wrench, 1/4 x 5/16 Open End
Wrench, 6" Adjustable
2101510 Rev. AG
>1
1
1
1 per
application
1 per
application
2
1 per
application
1
1
1
and are