Security Seal (Optional Equipment); Customer Supplied Materials; Instructions; Optional Equipment Enclosure (Optional Equipment) - ABB NGC8206 User Manual

2.17 Security Seal (Optional Equipment)

For some NGC installations, it may be desirable to attach a Security Seal on the
enclosure front and rear End Caps. To accommodate seal, please note the holes
located in the tab located on each End Cap (See

2.17.1 Customer Supplied Materials

•
•

2.17.2 Instructions

1) Insert security wire through holes located on end cap tabs.
2) Bring ends together and insert through holes in security seal (see
3) Use seal press to compress seal into wire. Ensure that the wire is firmly captured
inside seal.

2.18 Optional Equipment Enclosure (Optional Equipment)

If optional enclosure is used, it may be configured to include other options,
including but not limited, to a battery pack to provide power to the NGC,
communication equipment, solar power charger and additional I/O.
2101510 Rev. AG
1 ea. Security Wire Seal
Seal Press

Figure 2-28 NGC End Cap Tabs for Security Seal

Figure 2-29 Security Wire w/ Seal

Figure 2-28).
Figure
Page 2–37
2-29).