Start-Up Diagnostic Troubleshooting; Figure 6-1 Troubleshooting Flowchart - ABB NGC8206 User Manual

Return to
Start
Return to
Start
Return to
Start
Return to
Start

6.2 Start-Up Diagnostic Troubleshooting

This section focuses on determining what has caused an alarm during start-up
diagnostics. The Totalflow
are performed each time the unit is started. This start-up testing may be disabled,
but Totalflow recommends that it be left enabled.
The diagnostics consist of 4 areas of testing:
•
•
•
•
The start-up tests may also be performed on a regular schedule. See the PCCU
help files for more information on scheduling diagnostics.
Page 6–2
Go To
Startup
Diagnostics
Go To
Troubleshooting
Alarm
Go To
Power Supply
Troubleshooting
Chart
Go To
COMM
Troublelshooting
Chart
Call Totalflow
Technical
Support

Figure 6-1 Troubleshooting Flowchart

®
Carrier Pressure Regulator Test
Oven Temperature Test
Processor Control Test
Stream Test
YES
During
Startup?
NO
YES
NGC8200 has an extensive built-in list of tests which
START
YES Receive
Alarm?
NO
Batteries
YES
Dead?
NO
YES
COMM
Trouble?
NO
Still Having
Trouble?
NO
END
2101510 Rev. AG