Multi-Hopper Printer - Entrust Datacard CR825 User Manual

Printer Access Door
Access Door Handle
Access Door Lock

Multi-Hopper Printer

Input Hoppers 1–6
Hopper Lock
Bars
Output
Hopper
Input Hoppers 1 – 6
Output Hopper
CR825 and CE875 Instant Issuance System User's Guide
The access door provides access to the printer supplies and to
the rear access door release. Open the door to replace
supplies or clear a card jam. A slot inside the door holds the
printer User Reference Guide, which contains instructions for
performing routine printer tasks.
The handle allows you to open the printer access door.
The lock secures the printer access door. Unlock the door to
access the inside of the printer. The lock can be opened using
the key or through a command issued by an application.
Sending a command to open the lock opens all locks on the
printer and on any attached component.
Each hopper cartridge in the multi-hopper holds up to 125
cards (0.030 in. or 0.762 mm thickness).
The output hopper holds up to 25 completed cards.
Multi-Hopper
Lock
Lock Bar Release
Button (B1)
Cartridge Release
Buttons
Exception Slide
5