Select A Card Stock - Entrust Datacard CR825 User Manual

Select a Card Stock

The printer can have up to ten different card stocks defined. For example, one card stock might be
used for a general ID card, while others are used for a retail card or a financial debit or credit card.
Refer to the Printer Manager section of the printer's Installation and Administrator's Guide for
more information about card stocks.
You can use the front panel menus to specify the card stock that is loaded in the input hopper or
in each multi-hopper cartridge, or the card stock that will be inserted using the exception slot.
Do the following to select the card stock loaded in the input hopper.
1.
Press the U
panel.
2.
Press E
NTER
3.
Press the down arrow to display Configuration on line 2.
4.
Press E
NTER
5.
Press the down arrow until Hopper displays on line 2, and then
press E
NTER
6.
Press the down arrow until the correct hopper
displays on line 2. You can specify a card stock for
hoppers 1 through 6 in a multi-hopper printer.
7.
Press E
NTER
input hopper.
8.
Press the down arrow until the card stock displays,
and then press E
CR825 and CE875 Instant Issuance System User's Guide
button to display Suspended on line 1 of the LCD
SER
to enter the menu system.
to enter the Configuration menu.
to display the Hopper menu.
to select the card stock loaded in the
to save your selection.
NTER
27