Entrust Datacard CR825 User Manual page 22

Multi-Hopper Lock
Lock Bar Release
Button (B1)
Hopper Lock Bars
Cartridge Release Buttons
Exception Slide
6
The multi-hopper lock secures all six input hoppers. The lock
can be opened using a key or a command from your card
personalization software.
Sending a command to open the lock opens all locks on the
printer and on any attached component.
The release button (B1) releases the lock bars in front of the
input hopper cartridges. Slide the button to the left to release
the bars. You must have unlocked the multi-hopper using the
key or a software command before the lock bars can be
released.
The lock bars rotate to the left to allow access to the hopper
cartridge doors, so that you can load cards into the cartridges.
The cartridge release buttons allow you to remove the
cartridge from the multi-hopper unit. Push in the buttons,
squeeze the cartridge, and pull it out from the multi-hopper.
Notes:
You do not need to remove a hopper cartridge to load

cards.
Hopper cartridges can be removed for secure storage.

The exception slide allows you to insert a single card into the
printer without unlocking the multi-hopper or opening a
hopper cartridge. Refer to
Slide" on page 32.
"Use the Multi-Hopper Exception
About the Printer