233: Smart Card Contact Fail; 234: K1 Transport Card Jam; 235: K2 Transport Card Jam - Entrust Datacard CR825 User Manual

233: Smart card contact fail

There is a critical error with the smart card contact. The card will be canceled.
1.
Press the U
2.
Send the card job to the printer again.

234: K1 transport card jam

The card did not reach the required position on the K1 horizontal transport. The card will be
canceled.
1.
Press the U
2.
If the error occurs again, open the printer access door and remove the C2 retransfer film
cartridge.
3.
Turn the K1 manual advance knob counterclockwise to move the card to the output hopper.
4.
Remove the card from the output hopper.
5.
Replace the retransfer film cartridge.
6.
Close the printer access door.

235: K2 transport card jam

The card did not reach the required position on the K2 vertical transport. The card will be
canceled.
1.
Press the U
2.
If the error occurs again, open the printer access door.
3.
Press the K3 rear access door release to open the rear access door.
4.
Turn the K2 manual advance knob counterclockwise to move the card until it is accessible.
5.
Remove the card through the rear access door.
6.
Close the printer access doors.
CR825 and CE875 Instant Issuance System User's Guide
button to move the card into the reject tray and clear the error.
SER
button to move the card into the reject tray and clear the error.
SER
button to move the card into the reject tray and clear the error.
SER
81