Retrieve The Printer's Network Ip Address - Entrust Datacard CR825 User Manual

When the printer is in the Ready status, the LCD displays the model number of the printer.
Press the U
SER
the arrow keys to move through the menus, and press E
system has four major branches:
Use the Maintenance menu to run a cleaning card, print a test card, or reset the locks on a

system with locks.
Use the Status menu to see settings and data about the printer.

Use the Configuration menu to change settings.

Use the Activate menu to enable or disable the printer.

The Activate menu is used only during installation or removal of financial systems
that require activation.
H & T
INTS IPS
You can access the menu system when Ready displays on line 1 of the LCD panel.

The printer returns to the Ready status after 2 minutes of no activity. Changes that have not

been applied are lost.
To leave a selection without changing the value, press the up or down arrow key until Exit

displays, and then press E

Retrieve the Printer's Network IP Address

You must know the printer IP address to perform some tasks. For example, you must enter the
printer IP address when you define the printer to the CardWizard Administrator. You also use the
IP address when launching Printer Manager, the printer's web interface, from a browser window.
To display the IP address, you can do one of the following:
Press the up or down arrow key while the printer displays Ready. Refer to

Arrow, and Enter Key"
Use the LCD menu system Status menu.

If the printer is configured to use a static IP address, the printer's front panel displays
the address even when the printer is not connected to a network. In addition, the LCD
displays a "+" if the network is active, or a "-" if the network is inactive, as a prefix to
the static IP address.
CR825 and CE875 Instant Issuance System User's Guide
button to suspend the printer. Then, press E
.
NTER
on page 19.
to enter the menu system. Use
NTER
to make a selection. The menu
NTER
"Down Arrow, Up
23