240: C1 Supply Error; 241: C1 Supply Type Error; 242: Rt1 Reject Tray Full; 243: Card Lost - Entrust Datacard CR825 User Manual

240: C1 supply error

The C1 ink ribbon has encountered an error.
1.
Open the printer access door and remove the C1 ink ribbon cartridge.
2.
Reposition, repair, or replace the ink ribbon and advance the repaired area one full turn.
3.
Replace the ink ribbon cartridge.
4.
Close the printer access door.
Press the U
SER
H & T
INTS IPS
Refer to "Replace the Ink Ribbon"
on page 67 for more information.

241: C1 supply type error

The C1 ink ribbon does not support an action requested by this print job.
Use a supply designed for this printer model.
Press the U
SER

242: RT1 reject tray full

The reject tray is full.
1.
Open the printer access door.
2.
Remove the retransfer film cartridge.
3.
Remove the rejected cards.
4.
Replace the retransfer film cartridge.
5.
Close the printer access door.
Press the U
SER

243: Card lost

A card that is expected to be in the printer is no longer present. The card will be canceled and
added to the Lost Cards count. Send the job to print again.
Press the U
SER

245: Configuration error

The configuration is not compatible with the printer model. The printer cannot print cards until
the configuration issue is corrected. Contact your service provider for assistance.
CR825 and CE875 Instant Issuance System User's Guide
button on the printer to clear the message.
on page 32
button on the printer to clear the message.
button on the printer to clear the message.
button on the printer to clear the message.
or "Repair a Broken Ink Ribbon or Retransfer Film"
83