Print A Test Card - Entrust Datacard CR825 User Manual

Print a Test Card

The printer includes a test card that prints without using a driver or other source of card data.
Use it to verify that the printer is printing correctly. Make sure that cards are in the input hopper
and all supplies are loaded before you begin. Refer to
complete information.
1.
Begin with the printer Ready. The U
green.
2.
Press the U
LCD panel.
3.
Press E
NTER
4.
Press E
NTER
5.
Press the down arrow until Test Card displays on line 2.
6.
With Test Card displayed on line 2, press E
on line 2.
7.
Press E
NTER
After the card prints, the printer returns to Ready.
26
button to display Suspended on line 1 of the
SER
to enter the menu system.
to enter the Maintenance menu.
to print the test card.
"Load and Replace Supplies"
button shows steady
SER
to display Start
NTER
on page 29 for
Using the Printer