Multi-Hopper Printer - Entrust Datacard CR8 Series Cleaning Manual

Multi-Hopper Printer

1. Remove the ink ribbon and retransfer film cartridges, and the cleaning
sleeve. Refer to
2. Open the cleaning card package and remove the isopropanol cleaning
card.
3. Pull out the multi-hopper exception slide and insert the cleaning card.
4. Push in the exception slide. Clean the printer immediately. The
cleaning card dries out if it is out of its package for more than a few
minutes.
If the cleaning card appears
bowed, insert it as shown.
Card Without Bow
Card With Bow
5. Continue with
8
"Before You Begin" on page
Isopropanol
Cleaning Card
"Run the Isopropanol Cleaning Card" on page
6.
Exception Slide
527983-001_C
9.