Select A Color Mode - Entrust Datacard CR825 User Manual

Select a Color Mode

You can use the front panel menus to select the color mode that best defines the color printing
requirements for your site. The color modes are calibrated and installed in the printer during
manufacturing.
You also can select the color mode using Printer Manager. Refer to the printer's Installation and
Administrator's Guide for more information about the color modes available.
Do the following to select the color mode.
1.
Press the U
LCD panel.
2.
Press E
NTER
3.
Press the down arrow to display Configuration on line 2.
4.
Press E
NTER
5.
Press the down arrow until Color Mode displays on line 2, and
then press E
6.
Press the down arrow until the color mode you want to use
displays on line 2, and then press E
selection.
28
button to display Suspended on line 1 of the
SER
to enter the menu system.
to enter the Configuration menu.
to display the Color Mode menu.
NTER
to save your
NTER
Using the Printer