Retransfer Series Printers Cleaning Guide Contents Cleaning Kit Contents Cleaning Kit Contents ................3 The cleaning kit (part number 524554-001) contains the supplies Cleaning Schedule ................4 necessary to clean the printer and maintain print quality. The cleaning Routine Printer Cleaning ..............4 kit contains the following items: Additional Cleaning Tasks..............
Additional Cleaning Tasks The following table describes additional cleaning tasks you may need to Cleaning the retransfer series printer on a regular schedule helps to perform to maintain your printer and print quality. Do these procedures maintain the printer and obtain the best print quality only if you begin to experience printing issues.
Retransfer Series Printers Cleaning Guide Use the Isopropanol Cleaning Card Before You Begin Use the isopropanol cleaning card regularly to clean the printer. • If your printer has locks, unlock the input hopper or printer access door lock. If your printer does not have locks, disregard any Single-Hopper Printer instructions that ask you to unlock the printer.
Retransfer Series Printers Cleaning Guide Run the Isopropanol Cleaning Card Multi-Hopper Printer 1. Use the LCD panel to run the isopropanol cleaning card. 1. Remove the ink ribbon and retransfer film cartridges. Refer to “Before You Begin” on page 2. Open the cleaning card package and remove the isopropanol cleaning card.
Retransfer Series Printers Cleaning Guide Use the Adhesive Cleaning Card Multi-Hopper Printer 1. Remove the ink ribbon and retransfer film cartridges. Refer to “Before Use the adhesive cleaning card to remove particles that result from the You Begin” on page retransfer process.
Retransfer Series Printers Cleaning Guide Multi-Hopper Printer (cont.) Run the Adhesive Cleaning Card 6. Peel off the center strips on both sides of the adhesive cleaning card. 1. Use the LCD panel to run the adhesive cleaning card. Leave the side strips in place.
Retransfer Series Printers Cleaning Guide Replace the Cleaning Sleeve Prepare the Printer for Use After Cleaning Do the following after the cleaning cycle completes. The cleaning sleeve helps maintain print quality by removing dust and other particles from cards before they travel into the printer. Refer to 1.
Retransfer Series Printers Cleaning Guide Clean the Printhead Cam Rollers Replace the Cleaning Sleeve (cont.) Use the adhesive cleaning card to clean the printhead cam rollers. 5. Remove the protective wrapper from the cleaning sleeve and discard it. 1. Power off the printer.
Retransfer Series Printers Cleaning Guide Clean the Printhead Clean the Printhead (cont.) Use the Cleaning Swab Use the Lapping Stick 1. Power off the printer. If the print quality does not improve after using the cleaning swab, clean the printhead using the lapping stick.
Retransfer Series Printers Cleaning Guide Card Handling Information Clean the Rear Fan Filter Use the following information when purchasing and handling card stock: The rear fan filter is not present in all printer models. • Purchase quality card stock. Excessive burrs, scratches, surface defects, or contaminates on cards can result in print errors.
Retransfer Series Printers Cleaning Guide Notes Notes 527983-001_B 527983-001_B...
Page 13
952.933.1223 • 952.933.7971 Fax www.entrustdatacard.com Datacard is a registered trademark and service mark of Entrust Datacard Corporation, and Entrust is a registered trademark and service mark, in the United States and other countries. All other trademarks are the property of their respective owners.
Need help?
Do you have a question about the Retransfer Series and is the answer not in the manual?
Questions and answers