Installation Problems - Entrust Datacard CR825 User Manual

Installation Problems

This section describes issues that prevent a successful installation and provides recommended
solutions to those issues.
Problem
The network cable is
loose.
The printer displays
Ready on the LCD panel,
but it is not available.
The printer is not
configured with the
correct network address
56
Solution
Reconnect the data cable to the network port and the printer.
Restart the printer.
Follow your network troubleshooting procedures to isolate
and test each component of the computer-to-printer
communication link.
Suggestions:
Verify the computer-to-network connection by accessing a

network resource, such as a network drive.
The network administrator can test communication

between a server and the printer.
Make sure that the user is logged on to the network.

Make sure that the server name or IP address is entered in the
Port Settings or Configure Port dialog box on the computer.
For more information about retrieving the printer's IP
address, refer to "Retrieve the Printer's Network IP Address"
on page 23.
Make sure that Ready displays on the printer's LCD panel.
Troubleshooting