108: Magstripe Read No Data; 111: Card Not Picked; 112: Card Hopper Empty; 113: Close Cover To Continue - Entrust Datacard CR825 User Manual

108: Magstripe read no data

The printer did not find any magnetic stripe data on the card. The card will be canceled.
1.
Make sure that you are using magnetic stripe cards that match the printer settings.
2.
Make sure that the cards are placed in the printer correctly.
Press the U
SER
H & T
INTS IPS
The card might have been turned the wrong way. A diagram inside the input hopper shows

the correct orientation.
The card might not have a magnetic stripe.


111: Card not picked

The printer did not pick a card. To complete the current card:
For printers with an input hopper, open the input hopper, add or reposition cards, and close the
hopper.
For printers with single card feed, push the card in until the printer picks it.
Press the U
SER

112: Card hopper empty

The printer did not detect cards in the input hopper.
Add cards to the input hopper.
Press the U
SER

113: Close cover to continue

The cover is open or the print ribbon cartridge is missing.
Confirm that the print ribbon cartridge is installed and then close the cover.
Press the U
SER
H & T
INTS IPS
Make sure that the ink ribbon and retransfer cartridges are installed properly.

All access doors must be closed to process cards. Unlock, open, and close all printer doors to

make sure they are closed completely.
Lock the system.

CR825 and CE875 Instant Issuance System User's Guide
button on the printer to clear the message.
button on the printer to clear the message.
button on the printer to clear the message.
button on the printer to clear the message.
75