Access To Screens And System S; Calling - Polycom Sound station IP 5000 User Manual

Access to Screens and Systems
Symptom Problem
There is no response when you The phone isn't in an active
press a feature key. state.
The display shows Network Link The network cable isn't properly
connected.
is Down.

Calling

Symptom Problem
There is no dial tone. Power isn't correctly applied to
the phone.
There is no audible ring tone. Ringer volume is low, or the
Ring Type is set to Silent Ring.
The phone isn't registered to a
A hollow phone icon, ,
server.
displays next to the directory
number.
® ®
Polycom SoundStation IP 5000 Phone User Guide
Corrective Action
Try the following:
Press the keys more slowly.
•
Call the phone to confirm that inbound
•
call display and ringing is normal. If
successful, try to press feature keys to
access certain screens (for example,
Directory screens).
To confirm the line is actively
•
registered to the call server,
press , and then select Status >
Lines. From the Line Information
screen, verify that your phone line is
registered.
To attempt re-registration with the call
•
server, reboot the phone. For more
information, see your system
administrator.
See Power and Startup on page 55.
Corrective Action
Verify that power is correctly applied to the
phone:
Check that the display is illuminated.
•
Ensure the network cable is inserted
•
properly on the underside of the
phone. (Try unplugging and
re-inserting the cable.)
Verify ringer volume and Ring Type:
To adjust the ringer volume, press
•
when the phone is in the idle
state.
Check that the Ring Type isn't set to
•
Silent Ring. (See Changing the Ring
Tone on page 49.)
Ask your system administrator to register
the phone to a server.
57