Rebooting The System - 3Com LANPLEX 6000 User Manual

Rebooting the
System
Top-Level Menu
system
display
ethernet
softwareUpdate
fddi
baseline
tokenring
serialPort
bridge
password
ip
name
snmp
time
analyzer
screenHeight
script
consoleLock
logout
panelLock
ctlKeys
nvData
reboot
Table 4-1 Date and Time Formats
Format Description
first mm month (1–12)
dd date (1–31)
yy last two digits of the year (00–99)
hh hour (1–12)
second mm minute (00–59)
ss second (00–59)
xM either AM or PM
4 Press [Return] when you want the system to start keeping the time that you
entered.
See the example below:
Enter the new system time (mm/dd/yy hh:mm:ss xM):
09/30/94 10:00:00 AM
Press RETURN at the exact time:
If you system is connected to the Administration Console by an external
modem or through an rlogin or telnet session, rebooting the system
disconnects your session. To retain a connection to the Console through
reboots so that you can view diagnostic information, your system must be
connected through the terminal serial port.
To reboot the system:
1 From the top level of the Administration Console, enter:
system reboot
The following message appears:
Are you sure you want to reboot the system? (y/n):
2 Enter (yes) or (no).
y n
If you enter , the system reboots. If you enter
y
previous menu.

Rebooting the System

, you are returned to the
n
4-5