Rebooting The System - 3Com SUPERSTACK 2200 User Manual

4-4 C 4: A
HAPTER DMINISTERING
Rebooting the
System
Top-Level Menu
system
display
ethernet
softwareUpdate
fddi
baseline
bridge
consoleSpeed
ip
telnet
snmp
password
analyzer
name
script
time
logout
screenHeight
consoleLock
ctlKeys
nvData
reboot
Y S E
OUR YSTEM NVIRONMENT
Table 4-1 Date and Time Variables
Format Description
first mm month (1–12)
dd date (1–31)
yy last two digits of the year (00–99)
hh hour (1–12)
second mm minute (00–59)
ss second (00–59)
xM either AM or PM
4 Press [Return] when you want the system to start keeping the time that you
entered.
Example:
Enter the new system time (mm/dd/yy hh:mm:ss xM):
09/30/96 10:00:00 AM
Press RETURN at the exact time:
If your system is connected to the Administration Console through an rlogin
or telnet session, rebooting the system disconnects your session. To retain a
connection to the Administration Console during reboots so that you can
view diagnostic information, you must connect your system through the
Console serial port.
To reboot the system:
1 From the top level of the Administration Console, enter:
system reboot
The following message appears:
Are you sure you want to reboot the system? (y/n):
2 Enter (yes) or (no).
y n
If you enter , the system reboots. If you enter
y
menu.
, you return to the previous
n