Port - 3Com LANPLEX 6000 User Manual

An example of a summary display for Ethernet ports on an EFSM is shown
below:

port

1
12
port rxFrames
1 406876
12 242532
port rxErrs
1
12
Table 8-1 describes the type of information provided about an Ethernet
port.
Table 8-1 Description of Fields for Ethernet Port Attributes
Field
alignmentErrs
carrierSenseErr
collisions
excessCollision
excessDeferrals
fcsErrs
lateCollisions
lengthErrs
linkStatus
macAddress
(continued)
Displaying Ethernet Port Information
Office113_SPARCstation5
Office322_Quadra900
txFrames
1423733
1257721
txErrs no
0 0
0 0
Description
Number of frames received by this port that are not an integral
number of octets in length and do not pass the FCS check
Number of frames discarded because the carrier sense condition
was lost while attempting to transmit a frame from this port
Number of collisions detected on this port
Number of frames that could not be transmitted on this port
because the maximum allowed number of collisions was exceeded
Number of frames that could not be transmitted on this port
because the maximum allowed deferral time was exceeded
Number of frames received by this port that are an integral number
of octets in length but do not pass the FCS check
Number of times a collision was detected on this port later than 512
bit-times into the transmission of a frame
Number of frames received by this port longer than 1518 bytes or
shorter than 64 bytes
Boolean value indicating the current state of the physical link status
for this port (either enabled or disabled)
The MAC address of this port
portLabel
rxBytes
36377226
29293858
noRxBuffers txQOverflows
0
0
8-3
portState
on-line
on-line
txBytes
234900612
300479754
0
0