About Working With Nonvolatile Data - 3Com LANPLEX 6000 User Manual

7
About Working
with Nonvolatile
Data
S , R
AVING
R
ESETTING
This chapter describes the nonvolatile (NV) data in the system and how to
save, restore, and reset the data.
If you want to transfer NV data from one set of modules to another set or
from one module to another, save the system's NV data and restore it as
appropriate. You may also want to save a certain configuration of the
system for your reference and as a backup. You can also reset system data to
its factory-configured values, if necessary.
During a save, the contents of NV memory on each module are written out
to a disk file. All configurable parameters are saved in nonvolatile memory,
including:
System name
System date and time
Passwords
Packet filters
Ethernet port labels
FDDI resources settings
ESTORING
N
ONVOLATILE
Bridge and bridge port settings
IP interface configurations
RIP mode setting
SNMP mode setting
SNMP community string settings
SNMP trap destination configurations
,
AND
D
ATA