Port 1; Setting Tmaxlowerbound - 3Com LANPLEX 6000 User Manual

9-14 C 9: A
HAPTER DMINISTERING
Setting
tmaxLowerBound
Top-Level Menu
system
display
station
ethernet
tvxLowerBound
path
fddi
tmaxLowerBound
mac
tokenring
maxTreq
port
bridge
backplane
ip
snmp
analyzer
script
logout
FDDI R
ESOURCES
The tmaxLowerBound attribute specifies the minimum time value of
fddiMAC T-Max that will be used by any MAC that is configured onto this
path. This value specifies the boundary for how high T-Req (the requested
token rotation time) can be set.
To set tmaxLowerBound:
1 From the top level of the Administration Console, enter:
fddi path tmaxLowerBound
You are prompted for a slot related to the FDDI station.
2 Enter the slot(s).
You are prompted for a station, path, and value.
3 Enter the station.
If you are in multi-station mode, the stations available for you to choose are
those for which you have assigned MACs and ports.
4 Enter the path (
p
In single station mode, the primary, secondary, and local paths are available
for selection. In multi-station mode, the primary and secondary paths are
available for stations related only to the LMM+ (the secondary path is local
to the LMM+) and the primary path is available for all stations related to the
FCM, EFSM, and ESM.
5 Enter the new minimum time value.
The default is 165000 micro-seconds (us).
See the example below:
Select station [1]:
Select path(s) (p,s|all) [p]:
Station 1 Primary - Enter new value [165000]:
= primary, = secondary,
s
s
= local).
l