3Com LANPLEX 6000 User Manual page 112

9-6 C 9: A
HAPTER DMINISTERING
FDDI R
ESOURCES
See the following example of station information:
configuration
isolated
ecmState remoteDisconect
in
00-00-00-80-3e-02-95-00
This station display was generated from an LMM+ MAC attached to Station
1 of the system. Table 9-2 describes these statistics.
Table 9-2 Description of Fields for FDDI Station Attributes
Field Description
configuration Attachment configuration for the station or concentrator. Values
can be Thru, Isolated, Wrap_A, and Wrap_B.
connectPolicy Bit string representing the connection policies in effect on a
station. How connection policies translate into bits is described in
Table 9-3. This value can be user-defined.
ecmState Current state of the ECM state machine
remoteDisconnect Flag indicating that the station was remotely disconnected from
the network as a result of receiving an fddiSMTAction with the
value of disconnect in a Parameter Management Frame (PMF). A
station requires a Connect Action to rejoin and clear the flag.
station ID Unique identifier for an FDDI station
statusReporting Value indicating whether statusReporting is enabled or disabled for
the station. This attribute controls whether a station generates
Status Report Frames (SRFs) to report events and conditions to
network management stations. This value can be user-defined.
tNotify Timer used in the Neighbor Notification protocol to indicate the
interval of time between the generation of Neighbor Information
Frames (NIF). This value can be user-defined.
traceMaxExp Maximum propagation time for a Trace on an FDDI topology.
Places a lower bound on the detection time for an unrecovering
ring.
tNotify statusReporting
30 enabled
traceMaxExp
false 87500000
stationId
connectPolicy
0x8000