Setting The Port Speed - 3Com LANPLEX 6000 User Manual

Setting the
Port Speed
Top-Level Menu
system
summary
ethernet
detail
fddi
label
tokenring
portState
bridge
portSpeed
ip 4Mbps
portMode
snmp 16Mbps
analyzer
ETR-16Mbps
script
Setting the
Port Mode
Top-Level Menu
system
summary
ethernet
detail
fddi
label
tokenring
portState
bridge
portSpeed
ip
portMode
snmp
analyzer
script
You may set the port speed for any Token Ring port to 4 Mbps, 16Mbps, or
16Mbps Early Token Release. The default port speed for all Token Ring ports
is 16 Mbps.
To set the port speed for a Token Ring port:
1 From the top level of the Administration Console, enter:
tokenring portSpeed
2 Enter the slot number(s) of the TRSM(s) for which you want to set port
speed.
3 Enter the number(s) of the port(s) you want to set.
4 Enter
4Mbps, 16Mbps,
The port speed value (shown in the summary and detail displays) shows
on-line for all enabled ports displayed and off-line for all disabled ports
displayed.
Token Ring ports normally operate as 802.5 compliant stations which are
connected to the network through lobe ports on a MAU (Multistation
Access Unit). You can set the port mode for ports 1 and 2 to operate as lobe
ports for direct attachment of Token Ring stations. The default is station.
To set a Token Ring port to lobe mode:
1 From the top level of the Administration Console, enter:
tokenring portMode
2 Enter the module(s) for which you want to set port mode.
3 Enter the number(s) of the port(s) you want to set.
4 Enter or
station
The port mode value (shown in the summary and detail displays) reflects
the port's current mode.
or
ETR-16Mbps
for each Token Ring port.
lobe

Setting the Port Speed

for each Token Ring port.
10-9