3Com LANPLEX 6000 User Manual page 77

Top-Level Menu
system
display
ethernet
softwareUpdate
fddi
baseline
tokenring
serialPort
bridge
password
ip
name
snmp
time
analyzer
screenHeight
script
consoleLock
logout
panelLock
ctlKeys
nvData
reboot
To set a password:
1 From the top level of the Administration Console, enter:
system password
2 At the prompt requesting you to enter a password access level, enter one of
the following:
read
write
administer
3 At the prompt for your old password, enter the old password. If you have
never set a password or the password is null, press [Return].
4 Enter the new password.
The password can have up to 32 characters and is case sensitive. To enter a
null password, press [Return].
5 Retype the new password for verification.
See the example below:
Select menu option (system):
Password access level (read, write, administer):
Old password:
New password:
Retype new password:
The administration console password has been successfully
changed.
6 Repeat steps 1 through 5 for each level of password you want to configure.
Setting Passwords
password
4-3
read