3Com LANPLEX 6000 User Manual page 177

Administration console
Hide thumbs Also See for LANPLEX 6000:
Table of Contents

Advertisement

Table 13-1 describes the type of information provided for the bridge port.
Table 13-1 Bridge Port Attributes
Parameter
Description
designatedBridge
Identification of the designated bridge of the LAN to which the
port is attached
designatedCost
Cost through this port to get to the root bridge. The designated
cost of the root port would be the same as the cost received in
incoming BPDUs from the designated bridge for that LAN.
designatedPort
Identification of the designated port on the designated bridge
designatedRoot
Identification of the bridge designated as root
filtered
Total number of frames discarded by this port due to user-
defined packet filters
forwarded
Total number of frames forwarded from this port to all other ports
of this bridge. The total forwarded count is NOT equal to the
receive count minus the discard count, as a single received
multicast/broadcast frame can be forwarded to multiple bridge
ports. Also, frames that are flooded because of unknown
destination addresses account for multiple forwarding. The total
forwarding count is the instantaneous sum of the "forwarded to
counts" to all other ports of the bridge.
fwdTransitions
Number of times the port has entered forwarding state. This value
is useful for checking the stability of a bridged topology. The
more transitions in and out of the forwarding state means the
more unstable the topology.
pathCost
Cost to be added to the total path cost when this port is the root
port
port
Either Ethernet or FDDI (maximum possible count for EFSM: 1 =
FDDI and 2 – 16 = Ethernet)
portId
Identification of the port, which includes the port priority and the
port number (for example: 8002)
priority
First factor to determine if a port is to be the designated port
when more that one bridge port is attached to the same LAN. If
all ports in a bridge have the same priority, then the port number
is used as the determining factor.
rxAllFilters
Number of frames discarded because of a user-defined packet
filter on the receive all path of this bridge port
rxBlockedDiscs
Number of frames discarded by this port because the receiving
bridge port was not in the forwarding state
(continued)
Displaying Bridge Port Information
13-3

Advertisement

Table of Contents
loading

Table of Contents