Flushing All Addresses - 3Com LANPLEX 6000 User Manual

13-14 C 13: A
HAPTER
Flushing All
Addresses
Top-Level Menu
system
display
ethernet
summary
mode
fddi
list
detail
ipFragmentation
tokenring
add
multicastLimit
ipxSnapTranslation
bridge
remove
stpState
trFddiMode
ip
find
stpCost
addressThreshold
snmp
stpPriority flushAll
agingTime
analyzer
srRingNumber flushDynamic
stpState
script
freeze
address
stpPriority
logout
stpMaxAge
stpHelloTime
stpForwardDelay
srBridgeNumber
port
packetFilter
B P
DMINISTERING RIDGE ORTS
You are prompted for the address to be removed.
5 Enter addresses to remove, pressing [Return] after each entry.
Once you have entered all of the addresses to be removed, enter
to the previous menu.
You can flush all static and dynamic MAC addresses from the selected
port(s) on the module(s) you select. Static MAC addresses are those you
specify using the add menu option. Dynamic MAC addresses are those
automatically learned by the bridge.
When a switching module is moved to a different slot or chassis, all of its
addresses are flushed automatically.
To flush all addresses:
1 From the top level of the Administration Console, enter:
bridge port address flushAll
You are prompted for slot number(s).
2 Enter the number(s) of the slot(s) or
You are prompted for the port type.
3 Enter
Ethernet
You are prompted for the port number(s).
4 Enter the number(s) of the port(s) or
Static addresses are flushed from the ports you specified.
all
, , , or
FDDI tokenring
all
.
.
all
.
to return
q