3Com LANPLEX 6000 User Manual page 164

12-2 C 12: A
HAPTER DMINISTERING THE
B
RIDGE
The following example shows a display of bridge information.
stpState
enabled
topologyChangeCount
BridgeIdentifier
8000 00803e003040
bridgeMaxAge
20
bridgeFwdDelay
15
rootPort
1
addrTableSize
8192
ipFragmentation
enabled
Each item in the bridge parameter list is described in Table 12-1.
Source Route (SR) and Source Route/Transparent (SRT) modes are only
available on the LANplex TRSM. The default mode for all bridging modules is
IEEE 802.1d Transparent operation.
Table 12-1 Bridge Attributes
Parameter Description
addressCount Number of addresses in the bridge address table
addrTableSize Maximum number of addresses that will fit in the bridge address
table
addrThreshold Reporting threshold for the total number of addresses known
on this bridge. When this threshold is reached, the SNMP trap
addressThresholdEvent is generated. The range of valid values for
setting this object is between 1 and the value reported by the
addressTableSize attribute + 1.
(continued)
timeSinceLastTopologyChange
2
maxAge bridgeHelloTime
20
forwardDelay
15
priority
0x8000
addressCount peakAddrCount
55
1 hr 28 mins 31 secs
topologyChangeFlag
designatedRoot
7fff 00803e026294
helloTime
2
holdTime rootCost
1
agingTime
300
addrThreshold
105
false
2
220
mode
802.1d
8000