Administer Access Example; Write Access Example - 3Com SUPERSTACK 2200 User Manual

2-2 C 2: H
HAPTER OW TO
Administer Access
Example
Menu options: ------------------------------------------------------------------
Type 'q' to return to the previous menu or ? for help.
--------------------------------------------------------------------------------
Select a menu option (system):
Write Access
Example
Menu options: ------------------------------------------------------------------
Type 'q' to return to the previous menu or ? for help.
--------------------------------------------------------------------------------
Select a menu option (system):
U A
SE THE DMINISTRATION
Each time you access the Administration Console, the system prompts you
for an access level and password, as shown here:
Select access level (read, write, administer):
Password:
The passwords are stored in nonvolatile (NV) memory. You must enter the
password correctly before you are allowed to continue.
The following examples show how the top-level menu structure changes
based on the level of access. For information about setting passwords, see
page 4-2.
If you have administer access, each menu contains all options. Here is the
system menu for users with administer access:
display
softwareUpdate
baseline
consoleSpeed
telnet
password
name
time
screenHeight
consoleLock
ctlKeys
nvData
reboot
If you have write access, the system menu contains a subset of the
complete menu, focusing on the network, as shown here:
display
baseline
consoleSpeed
name
screenHeight
C
ONSOLE
- Display the system configuration
- Load a new revision of system software
- Administer a statistics baseline
- Set the console serial port baud rate
- Administer telnet sessions
- Set the console passwords
- Set the system name
- Set the date and time
- Set the console screen height
- Allow/Disallow remote access to the console
- Enable/Disable Ctl-X (reboot) and Ctl-C (abort)
- Save, restore, or reset nonvolatile data
- Reboot the system
- Display the system configuration
- Administer statistics baseline
- Set the console serial port baud rate
- Set the system
- Set the console screen height