Listing Network Prefixes And Addresses; Setting The Ume Connect State - 3Com CoreBuilder 2500 Software Installation And Release Notes

Listing Network
Prefixes and
Addresses
1 From the top level of the Administration Console, enter:
2 Select an ATM port.
Setting the UME
Connect State
1 From the top level of the Administration Console, enter:
2 Enter the ATM port for which to set the state.
3 Enter the new value (connected or disconnected). The default is
You can list the registered network prefixes and addresses of any ATM
port.
To list prefixes and addresses:
atm ume list
You are prompted for an ATM port.
The registered network prefixes and addresses are listed for the port that
you requested.
Sample UME list:
Port 1:
Prefixes registered at the user side UNI:
47-0005-80-ffe100-0000-f21a-200e
Addresses registered at the network side UNI:
47-0005-80-ffe100-0000-f21a-200e-00803e1f6712-00
47-0005-80-ffe100-0000-f21a-200e-00803e1f6713-00
For each ATM port, you can set the connect state for management access
and address registration.
To set the connect state:
atm ume state
You are prompted for an ATM port.
connected.
Administering UNI Management Entities 51